造纸废水综合治理技术的应用研究

采用“酸化 物化 生化”组合工艺并辅以芦苇湿地处理系统对造纸废水进行综合治理。通过优化工艺条件 ,逐级削减污染负荷 ,使废水排放达到国家标准     

柴油车加载减速工况烟度排放测试软件开发

依据《柴油车加载减速烟度排放标准》和《柴油车加载减速工况烟度检测计算机控制试验规程》的要求,开发了柴油车加载减速工况烟度排放测试软件。详细介绍了该测试软件的功能和特点。     

Design of a representative and cost-effective sampling programs for industrial wastewater with examples from bleached kraft pulp and paper mills

The diagram constructed for selection of sampling methods indicates that, for a systematic error, E ≤ 13%, grab sampling (GS) may be used to characterize effluents with variation coefficient of flow ≤ 120% and of contaminant concentrations ≤ 10%. For the whole studied range of variation coefficient of contaminant concentrations (2–82%), time-proportional compositing (TC) method may be applied with E ≤ 10% for effluents characterized by variation coefficients in flow < 90%. The more complicated flow-proportional compositing (FC) method is required only for effluents with larger variation coefficients or to produce more precise results. The diagram constructed for selection of sampling frequencies indicates that sequential sampling at intervals of approximately 60 min may be applied with E ≤ 10% for effluents characterized by variation coefficients ≤ 30%. Practical application of the diagrams, constructed using normal series, was checked against monitoring data from two pulp and paper mills in Vietnam. The two diagrams provided results on sampling methods and frequencies in good agreement with those obtained from actual monitoring data with percentages of agreement cases of 80 and 75%, respectively. The approach was applied in design of a monitoring program at the Bai Bang integrated pulp and paper mill in Vietnam.     

土氡测量在地质灾害勘测中的干扰实验研究

对土氡勘测中来自测量过程、勘测场地条件、气象因素方面的常见干扰进行了实验研究，探讨了干扰机理，指出了定性及部分定量排除干扰的方法。     

废纸造纸工业节水零排放技术

本文介绍了废纸造纸零排放技术的意义、零排放循环水处理需要解决的问题及工程实践情况。     

我国健身器材质量和检验现状分析及其对策

笔者从产品质量、检测体系和质检监管等方面系统地阐述了我国健身器材产业的现状 ;通过对国内外健身器材产业的比较和分析 ,指出了我国健身器材产业普遍存在技术含量低 ,质量不稳定 ,检测标准和设备欠缺 ,服务不完善等突出问题 ;同时还具体探讨了国内外健身器材的安全要求和使用性能在生化和环保两方面的不足 ;就上述种种问题提出了相应的发展对策 ,即遵循“以人为本 ,保障安全”的原则 ,积极发展现代化生产企业 ,前瞻性地开发高技术含量的安全型产品 ,健全符合国情实际的检测体系 ,从而全面提升我国健身器材的安全性能、服务水平和市场竞争力     

自动变光焊接护目镜响应特性测试仪研究

为制定变光焊接护目镜新产品专业标准提供支撑，进行了焊接弧光特性和变光焊接护目镜响应特性研究，解决了焊接弧光模拟、弧光信号检测、时间小信号检测等技术关键，研制了响应特性测试系统，并进行实测分析。便携式测试仪采用暗箱全封闭结构，能产生模拟的交直流弧焊信号，能检测10^-1～10^4lx照度的光信号并保持线性，能检测弧光作用下护目镜可见光透射比的整个变化过程，最大采样频率达30kHz，确保测试精度，能按响应时间定义进行记录和运算，测试接口具有通用性。     

Effectiveness of Africa's tropical protected areas for maintaining forest cover

The effectiveness of parks for forest conservation is widely debated in Africa, where increasing human pressure, insufficient funding, and lack of management capacity frequently place significant demands on forests. Tropical forests house a substantial portion of the world's remaining biodiversity and are heavily affected by anthropogenic activity. We analyzed park effectiveness at the individual (224 parks) and national (23 countries) level across Africa by comparing the extent of forest loss (as a proxy for deforestation) inside parks to matched unprotected control sites. Although significant geographical variation existed among parks, the majority of African parks had significantly less forest loss within their boundaries (e.g., Mahale Park had 34 times less forest loss within its boundary) than control sites. Accessibility was a significant driver of forest loss. Relatively inaccessible areas had a higher probability (odds ratio >1, p < 0.001) of forest loss but only in ineffective parks, and relatively accessible areas had a higher probability of forest loss but only in effective parks. Smaller parks less effectively prevented forest loss inside park boundaries than larger parks (T = ?2.32, p < 0.05), and older parks less effectively prevented forest loss inside park boundaries than younger parks (F_2,154 = ?4.11, p < 0.001). Our analyses, the first individual and national assessment of park effectiveness across Africa, demonstrated the complexity of factors (such as geographical variation, accessibility, and park size and age) influencing the ability of a park to curb forest loss within its boundaries.     

国产多核处理器芯片TDBI技术研究

随着集成电路的功能越来越复杂,超大规模集成电路的动态老炼越来越成为一项困难的工作。传统针对超大规模集成电路的老炼多采用静态老炼方法,这种方法不能使电路内部的功能节点动作起来,无法保证老炼效果,因此能够实现电路内部所有功能模块全动态激励的TDBI技术越来越受到人们的关注。本文以国产多核处理器芯片为测试对象,为研究多核处理器芯片的TDBI方法进行了芯片老炼测试软硬件系统开发,解决了多核处理器老炼中大功率电源供电、图形存储空间不足等关键技术。     

水中总氮空白的影响因素的探讨

本研究以水中总氮空白值为研究对象,不同厂家的过硫酸钾和不同试验用水条件下的总氮空白的变化规律。研究结果表明：无氨水和二次水蒸出来的总氮空白明显低于一次水蒸出来的总氮空白;这跟蒸馏水纯度有关系,一次水含有氨,所以消解时蒸馏水中的氨会被氧化,从而导致空白值偏高。同样有的厂家的过硫酸钾纯度不高,所以导致空白值高。